SUPER - P Film For packaging and related industries

Description
Super - P film is a Monoaxially Oriented Polypropylene formulated film engineered along with special additive blend for specific use in packaging industry. It distinguishes itself by strength coupled with economy and engineered properties to support specific application.
Super - P comes in plain or one side/ both sides corona treatment to promote bonding to inks and adhesives at a level of 38 to 42 dynes per centimeter.

Usage

• Pressure sensitive tapes
• Tear off tapes
• Masking tapes
• Metallizing
• Lamination
• Printing packaging
• Tyre wrapping
• Twist wrapping

Types

• High Tenacity grade for high speed machine applications
• Coating and lamination grades
• Matt grade

Advantages
It has high tensile strength and low elongation in machine direction which allows higher machine speed and reduced machine down time by less snapping in film due to superior tear resistance in cross direction.
It has very low shrinkage in cross direction and therefore has better dimensional stability at higher temperatures.
Virtually impermeable to water, moisture and air due to its non-hygroscopic nature.
Its low density gives outright saving of 40% on cost as compared to polyster for same film thickness. Higher tensile strength and low elongation compared to BOPP and other plastic films in machine direction, allows usage of lower thickness films, again resulting in super savings.
High clarity and gloss, good contact clarity, soft and pliable properties and immensely printable surface characterstics together result in enhanced appearance.
It can be used with hot-melt or water and solvent based adhesives.

Availability
Width
As per customer requirements 10mm to 1300mm
Thickness
15 Microns to 150 Microns
Colour
Transparent or Coloured as required

Corona Treatement
One side/ Both Side if required 38 to 42 dynes

Makeup
Super - P Tapes are wound on cores and made up into rolls
Standard core ID are 76mm, 100mm & 150mm Roll OD is upto 425mm (Max.)